Show Posts


Messages - quenncy

Pages: [1] 2
1
it looks like you made partially upgrade.
I just tried to replicate this, installed 1.1.0 and upgraded up to 1.1.1 by replacing files from abantecart_1.1.1_upgrade_only.tar.gz archive. Any problems. Buttons shows.
Please check file admin/view/default/template/pages/tool/package_installer_agreement.tpl

Well I replaced the admin/view/default/template/pages/tool/package_installer_agreement.tpl from the full 1.1.1 Installation and the Accept appeared and installed, however once I activated the "Templete2" on my store front there was allot of errors at the bottom of the screen below new template, text & pictures that is supposed to be there. Attached is a jpg.

2
This looks like a JavaScript related issue. Very strange. Button should show right after you select agree. What browser do you use?

UPDATE:  I am thinking like it might not be there browser.  Same error "Missing Accept Button" with Explorer 9.

Any other thought,  :)
Quenncy

3
This looks like a JavaScript related issue. Very strange. Button should show right after you select agree. What browser do you use?

Firefox ver.  16.0.2

Hope this helps, :)
Quenncy

4
Templates / Install Extention Flaw in Ver 1.1.1 on Except Button Missing
« on: November 15, 2012, 01:31:31 AM »
After upgrading from 1.1.0 to 1.1.1 I wanted to install the FREE TEMPLATE 2 that is in the Extension Store. I added it to cart and checkout receiving my installation code, I went back in the Install Extension tab and put in my key and soon the TERMS page come up and I scroll down and Checked Mark the  "agree to the license" and look for the ACCEPT BUTTON but it WAS NOT there only the DISAGREE Button is visible. This leave me at a stand still. I have look around pretty good but nothing visible on the ACCEPT Button.  The DISAGREE Button only takes you back to the beginning to start over of course.

Any Help would be appreciated.

Thanks in Advance,
Quenncy  :)

5
General Support / Re: CSV Resource Library's and Images
« on: November 15, 2012, 12:47:36 AM »
In my experience Excel may modify file in unexpected way.
Different versions of Excel may use different symbols/methods to enclosure columns, delimit them, define line end, etc.
You wrote that with TAB delimiter it is OK. Is it fine to you to use TAB delimiter?

Thanks Friend  ;)

6
General Support / Re: CSV Resource Library's and Images
« on: November 12, 2012, 12:01:42 PM »
Update:  It has something to do with Office (Excel 2007) because if I save it in a tab delimited txt format it works fine uploading but in any form of comma delimited csv format (mac, ms-dos or delimited csv) it fails every time. Wonder what could cause that issue?

Thanks,
Quenncy

7
General Support / Re: CSV Resource Library's and Images
« on: November 12, 2012, 11:00:33 AM »
Hello.

Please give me example of your CSV file.
Screenshot is not enough, sorry.

How would you like me to give you a example if not by screenshot?

Awaiting,
Quenncy

8
Support / Re: Importing Error "Data is empty or corrupted."
« on: November 12, 2012, 10:51:52 AM »
Hello.

Please give me examples of CSV files with data you try to import.

Thank you.

   I am assuming that you are talking about image attachments when you ask "Give Me Example"?  Here is one example of "Products" CSV that I downloaded from the system then add a new fist column with "Action" and "Delete" in every row then uploading it back still continuing to receive the error "Data is empty or corrupted."  The products listed are examples installed from AbanteCart installation that I wanted to remove. I have tried this upload both in CSV & XML but nothing has worked.  I am using Office (Excel) 2007 if that helps out any. 
  Any help would be greatly appreciated to identify this problem.  :D

Thanks,
Quenncy

9
Support / Re: Importing Error "Data is empty or corrupted."
« on: November 12, 2012, 12:47:15 AM »
Just checking in to see if anyone can add some input on the error in subject. :P


Thanks so much  ;),
Quenncy

10
General Support / Re: CSV Resource Library's and Images
« on: November 11, 2012, 10:22:35 PM »
Just checking in to see if anyone might have a answer to the above problem.

Standing by, Thanks ;D
Quenncy

11
Support / Importing Error "Data is empty or corrupted."
« on: November 11, 2012, 02:19:04 PM »
Hello All,  ;D

 I am still having a bit of trouble if someone could possibly help out on the issue it would be greatly appreciated.
I have freshly installed ver. 1.1.1 on my server and all works very well now except every time I attempt  to upload (import) categories or resource_library CSV or XML file I keep getting error "Data is empty or corrupted."  I have corrected the typo error in ver 1.1.1 (/admin/model/tool/table_relationships.php) on lines 35,36,37 and all is well there too. I have used a example by downloading (export) a categories CSV and then merely adding a ACTION on the first column using DELETE on every row then uploading (import) it right back but still continue to get the same error. I double check my categories and nothing has been changed.

Any thoughts or ideas would be greatly depreciated,
Quenncy  :)

12
General Support / Re: CSV Resource Library's and Images
« on: November 10, 2012, 01:29:31 PM »
Yes you can import to resource library. There is a small typo in 1 file that you need to change in version 1.1.1 and prior.

Fix:
open file: /admin/model/tool/table_relationships.php
Find line 35:
Code: [Select]
$this->sections['resource_library'] = array(
'id' => 'resource_id',
'relation_ids' => array( 'resource_id', 'type_id' ),

Replace with:
Code: [Select]
$this->sections['resource_library'] = array(
'id' => 'resource_id',
'relation_ids' => array( 'type_id' ),

Steps to import
1. FTP new images to /resources/image/ directory. Do not replace existing
2. Create CSV import file (see example attached)
NOTE: resource.type_id for image type is 1
3. Load CSV 
4. Check Recourse Library for new added images.

Similar any other types can be loaded. In version 1.1.2 resources can be loaded together with products, categories, etc. Improvements are coming

My friend,  well I am still having a bit of trouble if you could straighten me out on the issue it would be greatly appreciated.
I first upgraded from ver. 1.1.0 to 1.1.1 by merely updating all the PhP Files ONLY on my server and all works well there then I done just as directed in the quote above by correcting the typo issue in ver 1.1.1. on line 35,36,37 of  the /admin/model/tool/table_relationships.php & then used your example and created about a 50 lines in a csv file then attempted to import but continue getting this error "Data is empty or corrupted."  I have also attached my a pic of the CSV file that was formed from your example.

Any thoughts or ideas,
Quenncy  :)

13
General Support / Re: CSV Resource Library's and Images
« on: November 09, 2012, 12:16:17 PM »
You have trouble with your unarchiver.
Our package is correct and contains files.
try to install this stuff http://www.7-zip.org/ and unpack

I downloaded your new zip program and replaced my winrar program and the upgrade unzipped just fine now. I really don't know why winrar was not unzipping it correctly?

Ok so after unzipping file I attempted to manually upgrade to ver 1.1.1 from 1.1.0 on my server I get only text showing up and no images (Screen Shoot).
Here is what I did, I made a back up copy of all 4 folders first that I was going to replace on my server, then I took the four folders in the "Code" folder and uploaded them to where my others existed (public_html) replacing all the folders and contents.
What should I do now or better yet what am I doing wrong?

Thanks as always in advance my friend,
Quenncy

Ok friend, I have found my error it seems. Just as you said earlier "Only the PhP files". I have replace ONLY the PhP files in the upgrade file to my server in the same folders they came from and all works very well it seems.

Thanks so much as you where wonderful.

Thanks again,
Quenncy

14
General Support / Re: (Action) commands in CSV files?
« on: November 09, 2012, 11:26:16 AM »
Action can be insert, update or delete

Possibly this manual will help you:
http://www.abantecart.com/document_wiki/index.php/Import/Export_AData_class

We are working on better user manual for import/export takes time. We rely on anybody who can help

You are right it would help....LoL.... My bad, I just somehow didn't run across this but did the user manual but it didn't help that much on this topic. I should have looked harder.

Anyways I greatly appreciate you and your kind help very much,

15
General Support / Re: CSV Resource Library's and Images
« on: November 09, 2012, 11:13:09 AM »
You have trouble with your unarchiver.
Our package is correct and contains files.
try to install this stuff http://www.7-zip.org/ and unpack

I downloaded your new zip program and replaced my winrar program and the upgrade unzipped just fine now. I really don't know why winrar was not unzipping it correctly?

Ok so after unzipping file I attempted to manually upgrade to ver 1.1.1 from 1.1.0 on my server I get only text showing up and no images (Screen Shoot).
Here is what I did, I made a back up copy of all 4 folders first that I was going to replace on my server, then I took the four folders in the "Code" folder and uploaded them to where my others existed (public_html) replacing all the folders and contents.
What should I do now or better yet what am I doing wrong?

Thanks as always in advance my friend,
Quenncy

Pages: [1] 2

Powered by SMFPacks Social Login Mod