Show Posts


Messages - moosehound

Pages: [1] 2
1
Configuration / Re: SSL/HTTPS automatic switching issue
« on: June 06, 2016, 10:45:55 AM »
Hi,

It's been 4 days since my last post and all seems fine still :)  I didn't need to replace that file in the end I just cleared everything out and started afresh and it seems to have stuck this time :D

Thanks for all the support guys, very much appreciated!

2
Configuration / Re: SSL/HTTPS automatic switching issue
« on: June 02, 2016, 10:18:38 AM »
OK....

So I have cleared everything down cache wise, emptied the cache on my browser, recreated the htaccess, pointed the site directly to http://HTTPS://www.tranquilitea.co.uk and added the following to htaccess

Code: [Select]
RewriteCond %{HTTPS} off
RewriteRule ^(.*)$ https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

So far, it appear to be working.... I will update if it all falls through again :D

3
Configuration / Re: SSL/HTTPS automatic switching issue
« on: June 02, 2016, 09:59:26 AM »
Hi,

I have done the following:

Cleared the Cache - many, many times
Renamed my htaccess file, it's no longer in use
Had my provider check my server config multiple times over
Triple checked my settings in the Store software
It doesn't work.

IF I go to the backend/admin part it works under HTTPS.  If I go to http://HTTPS://www.tranquili-tea.co.uk/hjdhfkjhfdsf I get an error page but it's a HTTPS secure connection still (padlock/key whatever).
The only time HTTPS fails to do anything is if I connect to the store front....  https://www.tranquili-tea.co.uk does not give mea secure connection.  https://www.tranquili-tea.co.uk/index.php?rt=checkout/cart does not give me a secure connection.  So I can only assume it has to be something related to the cart software itself as anything else on the webserver seems Ok...

Any ideas?  If not is there a way for me to wipe my install and re-instate my current store on the fresh install?  I presume there's a backup/restore procedure that covers this one?   Starting to think a reinstall os the only solution here...

Thanks guys.

4
Configuration / Re: SSL/HTTPS automatic switching issue
« on: June 01, 2016, 02:55:42 PM »
I'll try these couple of things are let you guys know :)

Thanks.

5
Configuration / Re: SSL/HTTPS automatic switching issue
« on: May 31, 2016, 01:58:32 PM »
OK this is still not working :(  Even if I ignore the fact that going to http://HTTPS://www.tranquili-tea.co.uk doesn't actualy give me a secure connection the site just isn't switching to HTTPS on the pages it should (Accounts/Registration/Cart etc).

So I can't force it to use HTTPS for the whole site and I can't leave it to swap over automatically....

Any other ideas?  I've just got the standard 1.2.6 install that I've updated to 1.2.7.  I have added the line I mentioned in an earlier post to htaccess but apart from that it's all pretty much stock...

If I go to the admin part of the site and user https:// before that then it connects and lets me use the admin portal no problems.  It literally seems to not like when the store loads-in...


6
Yup that's got in under control -  just a shame that the full page image has to suffer (had to drop from 380 to 335 width) as a result of that overall change :(

Thanks for the help :D

7
Hi,

Sorry should have said it's the latest release of the cart software 1.2.7 - will check that now thanks.

8
Hi,

I'm sure it's just my image sizes or something simple I've overlooked BUT can anyone point me in the right direction for this issue?  My product images are just fine on a Laptop/PC or on a mobile devices BUT put it on an iPad/Tablet and the image bleeds over in to the description text (see pic).


it doesnt' happen with the demo images so that's why I presume it's something to do with my product image sizes which are roughly 1555px. x 1166px.

Thanks kindly.

9
Extension Support / Re: Weight based shipping issues
« on: May 30, 2016, 06:03:44 PM »
HAH!  I feel such a fool :)  Totally forgot to set those when re-doing things so that explains why the new weights didn't work! :D

Thanks kindly for the help.

10
Extension Support / Re: Weight based shipping issues
« on: May 30, 2016, 01:19:38 PM »
Is there a way to add "Weight Modifier" to this part of the Product Options?  That would solve my problem easily....  Then I could just add the additional weight there which in turn should mean it weighs the correct amount in the cart - or perhaps add a way to explicitly set the weight of each option?

11
Configuration / Re: SSL/HTTPS automatic switching issue
« on: May 27, 2016, 12:57:10 PM »
Hi,

No nothing inbetween.  i was going to setup Cloudflare at some point but not yet.  It literally just comes and goes... I can also browse the HTTPS sections of the site and it doesn't swap over to HTTPS.... It's like that whole mechanism is broken for me...


Thanks for any help everyone :D

12
Extension Support / Re: Weight based shipping issues
« on: May 27, 2016, 08:46:20 AM »
Nope - still doesn't work :(

I'm going to have to make a product for every weight at this rate which'll mean 3 types of the same product just at the three different weights... which isn't elegant :(

13
Configuration / Re: SSL/HTTPS automatic switching issue
« on: May 27, 2016, 08:38:28 AM »
Still no thoughts on this one?  Seems weird that simply going in, setting Template Debug On, then Off, then On again followed by saving the page, should get HTTPS to function again for a short while...  Anyone... or should I just backup the site, remove it totally, reinstall and restore the backup?

14
Extension Support / Weight based shipping issues
« on: May 23, 2016, 11:59:58 AM »
Hi,

I amended some of the initial test products that come with Abantecart.  I want to be able to offer products in several different weights (25g, 50g, 100g) so I changed the Weight Global Attribute.  I had two options at this time 60g and 125g.  I added it to some products, and when selecting the relevant radio button (60g/125g) the weight in the cart would alter as expected and as such the weight based shipping would update to the correct amounts.  I've since changed the Global Attribute to 50g/100g and removed/re-added them on the Options tab for the products.

Now since doing this it no longer seems to modify the weight of the actual cart when I select the options from the drop down.  The only one I still have that works is an amended "Ruby Shoo Womens Jada T-Bar" from the install test date.  That said that says 60g/125g still and has radio buttons instead of the updated 50g/100g and drop down menu from the updated Global Attribute.  I just know if I go and remove/update the global attribute on the Options tab for that product it too will stop working....

So what's gone wrong?  Am I expecting it to do something it can't?  It WAS working just fine until I wanted to alter that Global Attribute from 60/125 to 50/100 now it appears to just not work...  This is one in a long line of issues that's really beginning to bring me down :(

site: www.tranquili-tea.com

Working product:  www.tranquili-tea.co.uk/tea/ruby-shoo-womens-jada-t-bar
Not working?  Any of the others including the direct copy I took of the working product :(

Long story/post short:  I need to be able to choose 3 different weight sizes on each product and have that weight reflected in the total basket weight... is that possible?  Did I dream that I had that working?


Thanks anyone for the help :)

15
Configuration / Re: SSL/HTTPS automatic switching issue
« on: May 22, 2016, 06:06:03 AM »
OK, it's official, if I go in to Settings>System and save the page then SSL starts working again... for awhile...  Any ideas?  The only thing in my logs is:

Code: [Select]
Name
Info
9101::App Warning
Extension banner_manager overrides core template with blocks/banner_block/one_by_one_slider_banner_block.tpl in /home/zethwa/public_html/tranquili-tea.co.uk/core/engine/view.php on line 287
9101::App Warning
Extension banner_manager overrides core template with blocks/banner_block_content.tpl in /home/zethwa/public_html/tranquili-tea.co.uk/core/engine/view.php on line 287

Pages: [1] 2

Powered by SMFPacks Social Login Mod