Show Posts

Messages - llegrand

Pages: [1] 2 3 ... 112
Idea Polls / Re: Customize plug-in solutions according to needs
« on: January 06, 2022, 10:59:16 AM »
My opinion is the proposed location of the request being on the cart Admin panel is the wrong place.
The better place IMO remains on the forum board.

General Support / Re: Is there anyway of having 1/2 (half) quantities?
« on: January 04, 2022, 06:07:32 PM »
Please refer to the screen shot   -  I set up the product within the testing site I provided.

this is what that option does ,  it allows admins to control what is seen on the product display page.
This why we made the extensions at our clients request - so  option prices could be clearly shown.

Either of the extension  Option lite or Option Pro allows for the management.

General Support / Re: Is there anyway of having 1/2 (half) quantities?
« on: January 04, 2022, 02:10:50 PM »
Hello again,

Are your remarks here about the default options and how they work?   

You had requested a testing site for our options lite and options pro extensions and we provided those to you last nite.
If you are having questions on how to configure those options please respond via the email with the testing site into.

The WHY2 support team

General Support / Re: How do I offer lower prices for quanity?
« on: January 03, 2022, 04:35:31 PM »
One more thought -  since having an odd ending price is not your desire  you could perhaps use options.
The important thing to know about options is to use a price modifier for the ending price.  This means the base product price PLUS the modifier equals the ending pricing to customer

I made a rough screen shot for you, showing one of the option methods (checkbox)

We have several extensions  that we offer for handling options so the ending pricing is not so confusing.   Below is the links to our manuals so you can see how to provision, etc.

Additionally I asked you in a different post what you were selling - something with weight or length or?
We have some additional extensions that handle those types of calculations.

Give the options a try and see if they will work out for you.

General Support / Re: How do I offer lower prices for quanity?
« on: January 02, 2022, 08:18:43 PM »
you need to use the PER EACH pricing .   Please refer to the screen shot and the message I sent earlier.

The total price is calculated on the qty times the per each pricing.   so 1 at 10  = 10,    2 at 9 each  = 18,   etc
The quantity  does not allow for decimals only whole numbers.

General Support / Re: Is there anyway of having 1/2 (half) quantities?
« on: December 30, 2021, 01:17:32 AM »
what type of products are you selling that you need a fractional amount?

length,  weight,  ??

General Support / Re: How do I offer lower prices for quanity?
« on: December 30, 2021, 01:13:05 AM »
I believe your issue is not understanding that the pricing for the quantity is PER EACH.

you show one at 10  and you have qty  at 50.
the correct  qty pricing would be 50/7  or 7.15  each (rounded off)

refer to my screen shot to see how it displays

General Support / Re: How do I offer lower prices for quanity?
« on: December 29, 2021, 04:40:27 PM »
Did you read this documentation:

send us a screen shot of your settings and what is wrong with the pricing displayed and we will try to assist you better

Support / Re: Waiting (TTFB)
« on: November 08, 2021, 04:57:31 PM »
suggest you run some analysis from these two sites--  drill down and see where you are dragging and look into their suggestions.
Load is impacted by lots of things,  what all is needing to load on your home page, the size impact of your images,  apps, etc.

We have found this issue on several of our client sites,   the fix for us has been to configure the email sending using SMTP rather than the system send mail. 

check this AbanteCart doc for info on enabling SMTP mail settings.

General Support / Re: No images displayed after fresh install
« on: November 02, 2021, 03:38:20 PM »

BlueHost offers Softaculous,  you may find that an easier way to install AbanteCart which is available in most Softaculous offerings.

And here is the AbanteCart docs on installing with Softaculous

Support / Re: banner manager clicks without views
« on: October 27, 2021, 10:23:44 AM »
They are the same block on the same installation.

1st shot was how it was configured.  The images in the OFF condition in the selection box, and the  adding the click count even though no image was being displayed.

The 2nd shot is the same block after changing the selected images and turning ON the block.

Support / banner manager clicks without views
« on: October 26, 2021, 09:15:12 PM »
Hi Guys,
I encountered some odd behavior with banner image and banner block.   Some images had been set to off after Christmas last year.  Other images in banner images had been turned on and arranged with sort order  and appear correctly in the home page of the site. 

However,  the banner block , which contained the off images was only turned to off for the block. The new On images have not been added to the block until today. 

The oddity is the reports on banner stats shows clicks for 10 months,  no views. 

My question is why is an OFF condition recording clicks to something that cannot be seen on the site?

This is in AbanteCart 1.3.1,  but occurred from 1.2.16,  and 1.3.0

Support / Re: Looking for a way to have conditional selections
« on: October 21, 2021, 01:01:04 AM »
Yes,  it is via the options

Here's the link to some info:

I suggest you learn how to use Softaculous - if your cPanel offer Softaculous to you.

Here is the link to our KB with some documentation

Make your base site.  Then you can clone it, change your name, etc.  You can also use softaculous to move it to a different host. 

Pages: [1] 2 3 ... 112

Powered by SMFPacks Social Login Mod